NEWS
HANGXIN FLANGE
Features and Applications of Stainless Steel Concentric Reducer
Date：
2022-11-10 00:00
Source：
Stainless Steel Concentric Reducer is a type of pipe fitting for pipe reduction. The commonly used forming processes are reducing diameter pressing, expanding diameter pressing or diameter reducing and expanding diameter pressing, and stamping can also be used for reducing pipes of certain specifications.
The diameter reduction forming process of Stainless Steel Concentric Reducer is to put the tube blank with the same diameter as the large end of the reducer into the forming die, and by pressing along the axial direction of the tube blank, the metal moves along the die cavity and shrinks to form. According to the size of the reducing diameter of the reducer, it is divided into one press forming or multiple press forming.
The Stainless Steel Concentric Reducer is made of carbon steel and is expressed by multiplying the diameter of the large end by the diameter of the small end and multiplying the thickness.
The standard of Stainless Steel Concentric Reducer: National Standard, American Standard, British Standard and various non-standard high pressure stamping.
The diameter reduction forming process of Stainless Steel Concentric Reducer is to put the tube blank with the same diameter as the large end of the reducer into the forming die, and by pressing along the axial direction of the tube blank, the metal moves along the die cavity and shrinks to form. According to the size of the reducing diameter of the reducer, it is divided into one press forming or multiple press forming.
Stainless Steel Concentric Reducer is characterized by significantly higher strength than carbon steel with the same amount of carbon, better toughness and plasticity, as well as good weldability and corrosion resistance.
Applications of Stainless Steel Concentric Reducer:
1. When the flow rate of the fluid in the pipeline changes, such as increasing or decreasing, and the flow rate requirement does not change much, it is necessary to use a reducer.
2. At the inlet of the pump, in order to prevent cavitation, it is necessary to use a reducer.
3. At the joints with instruments, such as flow meters and regulating valves, in order to cooperate with the joints of the instruments, reducers are also required .
Keywords：
Stainless Steel Concentric Reducer
RELEVANT NEWS
Engaged in the manufacture and export of flanges and pipe fittings. Located in Mengcun county knows as hometown of elbows and pipe fittings in China.
QUICKLINK
GET IN TOUCH
Copyright © Cangzhou Hangxin Flange Co.,Limited. All Rights Reserved.