NEWS
HANGXIN FLANGE
SOH Flange company introduces the Flange assembly method for you
Date：
2023-02-10 16:03
Source：
Many people don't know how to assemble Flange, today SOH Flange company will introduce it to you.
1. Before assembling the flange, the flange surface must be cleaned, especially the sealing surface.
2. When assembling flat welding flanges, the pipe end should be inserted into 2≤3 of the thickness of the inner diameter of the flange, and then the flange and the pipe are spot welded. If it is a horizontal pipe, the flange should be spot-welded from above, and then the position of the flange should be checked and corrected from different directions with a 90° angle ruler so that the sealing surface is perpendicular to the center line of the pipe. point is correct.
3. Use a 90° angle ruler to check and correct the position of the flange from the left and right directions. After passing the spot welding at the third and fourth points, the spot welding and fixing of the flange are completed.
4. As far as the assembly of the flange pair is concerned, the bolt holes of the mounting flange should be aligned with the corresponding bolt holes of the fixed flange, and parallel to the fixed flange, and the deviation should not be less than 1.5% of the outer diameter of each thousand flanges. And not more than 2mm.
5. SOH Flange company recommends that you pay attention to whether the flanges of the original equipment or valve components are consistent with the flange connection size used in the pipeline when selecting matching flanges for equipment or valve components.
Keywords：
SOH Flange company,Discount Butt welding flange,utt welding flange china
RELEVANT NEWS
Engaged in the manufacture and export of flanges and pipe fittings. Located in Mengcun county knows as hometown of elbows and pipe fittings in China.
QUICKLINK
GET IN TOUCH
Copyright © Cangzhou Hangxin Flange Co.,Limited. All Rights Reserved.